Before you buy the Treatlife HTERX2, check what's inside.

The Treatlife HTERX2 is a simple RF 433MHz remote control designed for basic home automation functions. It is part of the Tuya/Smart Life ecosystem and is powered by a common coin cell battery.

⚠️ NOTE: Ensure correct battery polarity.

Quick Specs

  • Manufacturer: Treatlife
  • Model: HTERX2
  • Protocol: WiFi
  • Chipset: Beken
  • Ecosystem: Tuya / Smart Life
  • App: Smart Life

🔧 Geek Corner (Flashing Info)

  • Chipset: Beken
  • Flashable: ❌ No
  • Info: RF remotes are typically not flashable for custom firmware like Tasmota.

User Manual

Scanned pages from the official user manual:

External Photos

Photos of the device exterior:

Internal Photos

Teardown photos showing the PCB and components:

Verdict

The HTERX2 is a WiFi device from the Tuya / Smart Life ecosystem.

📄 Click to view full text manual (SEO)

http://www.tpmseuroshop.com/documents/declaration_conformities

Unit 11 Technology Park
Belfast Road
Antrim, Northern Ireland, BT41 1QS
The device under test is manufactured by the grantee (Sensata) and sold as an OEM
product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure
the end-user has all applicable / appropriate operating instructions. When end-user
instructions are required, as in the case of this product, the grantee must notify the OEM to
notify the end- user.

Sensata will supply this document to the reseller/distributor dictating what must be
included in the end user’s manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL

The following information (in blue) must be included in the end product user’s manual
to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers
must be included in the manual if the device label is not readily accessible to the end
user. The compliance paragraphs below must be included in the user's manual.

This device complies with Part 15 of the FCC Rules and with Licence exempt RSS
standards of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.

******************************************************************************

FCC ID: 2ATIMHTERX2...